09-28-2010 07:12 AM - edited 03-04-2019 09:55 AM
hey guys,
one of our customer has went got him self broadband with o2 and with o2 he dose not have a username and password to put the router. he is using a cisco 857 but one of the engineers dose not how to set it up, i cant seem to get my head round it as well, i Spoke to Technical support who say the router needs to be setup as standard MER (sometimes refered to Enet Endcap) LLC Encapsulation VPI = 0 VCI = 101 NTU = 1500 DNS 208.67.222.222 208.67.220.220
any ideas?
thanks
Zubair Norat
09-28-2010 07:20 AM
You can find so many examples, this is one
http://www.cisco.com/en/US//tech/tk175/tk15/technologies_configuration_example09186a008071a581.shtml
09-30-2010 08:58 AM
paolo thanks for the link but that didnt not work. any other ways of doing it?
09-30-2010 09:42 AM
Send "show dsl interface" and config.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide