OSPF Route Manipulation

[dhughes133]

HI I have the attached topology. Within AWS (bottom we have two subnets 10.60.13.0/24 and 10.60.15.0/24 which sit within the the larger 10.60.12.0/23 and 10.60.14.0/23 subnets. We use .13 and .15 for replication and would like to force those subnets over the second link (primary on the left secondary on the right) traffic for the two subnets already comes in that way but goes out via the primary link. There is a cost on the secondary interface of 110. 

I've been trying to do this via a route map but not having any luck. 

Any ideas anyone.

Thanks

Darren

[flamingbk]

How the subnet 192.168.0.0/16 is injected into ospf domain? Both border routers advertise with the same metric/PA?
And wich metric/PA the 10.60.12.X and 10.60.14.X networks are being injecteds in the MPLS domain ?

Regards,
Fernando.