02-20-2016 11:26 PM - edited 03-05-2019 03:23 AM
Dears,
I'm facing a problem in our network, at 5 PM internet is not working when we restart the Router the router it works fine. Router Model is 2921, I checkd the CPU Utilization its 50 % for last 3 days. Dedicated link is 20 MB for this site.
and can any one tell about this command,
Thankx.
show interfaces gigabitEthernet 0/0 summary
*: interface is up
IHQ: pkts in input hold queue IQD: pkts dropped from input queue
OHQ: pkts in output hold queue OQD: pkts dropped from output queue
RXBS: rx rate (bits/sec) RXPS: rx rate (pkts/sec)
TXBS: tx rate (bits/sec) TXPS: tx rate (pkts/sec)
TRTL: throttle count
Interface IHQ IQD OHQ OQD RXBS RXPS TXBS TXPS TRTL
-----------------------------------------------------------------------------------------------------------------
* GigabitEthernet0/0 0 9 0 0 21366000 2021 1875000 1443 5
* Gi0/0.207 - - - - - - - - -
* Gi0/0.1659 - - - - - - - - -
NOTE:No separate counters are maintained for subinterfaces
Hence Details of subinterface are not shown
02-21-2016 04:42 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
What's your route statement look like to the Internet?
Something like
ip route 0.0.0.0 0.0.0.0 g#/#
or
ip route 0.0.0.0 0.0.0.0 #.#.#.#
02-21-2016 05:03 AM
yes
ip route 0.0.0.0 0.0.0.0 94.97.100.23
02-21-2016 04:47 PM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Ok, good, I was worried you were using an interface as next hop, which often overflows an ARP cache when going to the Internet.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide