Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have below requirement for our branch site.
1. New gateway model 4351 need to be configured at branch site
2. CUCM cluster is at head office.
3. We have 11 FXO line from ITSP for our branch gateway.
4. 5 FXO lines are grouped as trunk from ITSP wi...
Hello all,
I'm using Virtual FTD and FMC. FTD registers with FMC but after sometime it's showing error in FTD Status, connectivity between FMC and FTD is ok.
When I check from FTD cli by this command Show manager,
Show manager
syntax error: Illega...
Hello,
doing Site to Site IPSEC VPN using Flex VPN, everything is working except virtual-template protocol is in down state.
Virtual-Access1 192.168.1.1 YES unset up up Virtual-Template1 192.168.1.1 YES unset up down
I cleared crypto sessions on...
Hello all,
I'm facing problem in AP. We are using standalone access points, all's working fine but signal strength is very weak.
Product/Model Number:
Product/Model Number:AIR-SAP1602E-E-K9 Top Assembly Serial Number:FGL2035X04H System Software F...
Hello all,
I'm facing a problem in our network, using SCCP and SIP IP phones. Problem is we can call from SCCP to SIP Phone and from Mobile to SIP phone working. But when we dial from SIP to SCCP or mobile its not working. How I can fix this issue.
...
