ā05-31-2024 02:01 AM
I am new to cisco Packet Tracer and I have been trying to set up IPsec between my IPsec PC and my BatSignal PC for my university assignment. However, for some reason, I can not ping my PC from any devices which are not connected directly to the operations switch, why is that?
ā05-31-2024 03:23 AM
- FYI : Community group for Packet Tracer project questions
M.
ā05-31-2024 05:18 AM
Thank you! However, I could not upload my Packet Tracer File to that forum so I thought best to post it here
ā05-31-2024 10:53 PM
@tusharnav123 wrote:
I could not upload my Packet Tracer File to that forum so I thought best to post it here
There are multiple threads with the PT file attached.
ā05-31-2024 04:05 AM
Hello,
both PCs are in the same subnet, and have no default gateway configured. What are you trying to accomplish, which instructions are you following ?
ā05-31-2024 05:14 AM
We were not given any instructions and the goal is to create a functioning network with as much details as possible. I am still very new to cisco packet tracer so feel free to tell me everything I did wrong
ā05-31-2024 06:10 AM
Hello,
thanks for the clarification. Are the IP addresses in your network supposed to remain as they are, or can they be changed ? An IPSec VPN is usually built between two routers, but in order to do that, I would need to change the IP addressing...
ā05-31-2024 04:06 PM
Hi,
All good. No they can be changed, when you change them, can you also explain what you did and why so I know for future reference
Cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide