ā03-07-2010 07:09 AM - edited ā03-04-2019 07:44 AM
I could not ping to 140.1.2.0--200 from our lan pc(192.168.1.x),
.But ,when I add routes to CS-2 router(Cs1 =cs2) as
ip route 140.1.2.0 255.255.255.0 192.168.1.46 and for the ASA as route INTRANET 140.1.2.0 255.255.255.0 192.168.255.14 1,
I could some IP addresses like 140.1.2.100--101,107,etc but not all & 140.1.2.132 was pinging earlier before the changesand not pinging now.how do i enabling pinging for all & 140.1.2.132??anybody can help me pls??
thx
ā03-07-2010 08:42 PM
Hi,
1.Are you able to ping all the ip's from you cs1/cs2 ?
2.You specified you had to add routes explicitly in there, so does that mean that it used to work earlier without that by via some IGP ?
3. Is that a floating static route specified for the ASA to reach Holding n/w ?
4.You need to enable extensive debugging like deb ip packet detail
5.If you find it cumbersome adding static routes every now and then, switch to an IGP like Rip v2 or Ospf for better manageability.
ā03-08-2010 10:22 PM
Hi Tarak,
Thanks a lot for the reply & hope I sort out the problem.It seems it's their problem.except 140.1.2.132,others can reach.Even for 132,its reaching up to their core router.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide