03-24-2009 02:35 PM - edited 03-04-2019 04:04 AM
I have two 3640's using a point to point 2xT1 link but when I attempt to ftp a file to and from the max throughput I get is ~1Mbps. The routers are running IOS 13.3(13). On one side the 3640 connects to a 6513 core switch and on the other to a 3550 switch and then 2900's. I can provide any configs to be looked at. I don't know really where to start to see about improving the performance of this link. No IPSec, using EIGRP, no errors on the serial interfaces....
Juan
03-24-2009 05:57 PM
Post the output of the interfaces in question.
Is there something in the providers cloud causing latency?
Do an extended ping from either side and look for any drops or latency.
03-25-2009 11:20 AM
03-25-2009 07:37 PM
If you go to dlsreports.com (from each end on the lan what speed does it say you are downloading at?
I would do a trace an extended ping (500 packets 1500 mtu) from the lan on each end.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide