cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5119
Views
0
Helpful
3
Replies
Highlighted
Beginner

Port 80 not Forwarding

please help me out, i am trying to forward port 80 to my web server but its not working, if i ping my website its replying, but if itry to access it from the browser its not working

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hello

To configure  your Cisco router  to do  Port forwarding to your web server you will need to do the following

IP nat inside Source static tcp  "your privet IP address" " Public IP Address "  80  extendable

The above command will do the  NAT port forward  but you will need to add  ACL.

Access-list 171 permit tcp any host “Public IP Address " eq 80

And case it was HTTPs you will use 443 instead of port 80 .

Hope it will help

View solution in original post

3 REPLIES 3
Highlighted
Advisor

Hi,

from where are you trying this? what is the forwarding device, a router or firewall ?

are you sure your server is listening on port 80 ? are there any ACL or firewalling feature in place ?

Post your configs as well as the screenshots of your test.

Regards.

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
Highlighted

Hello

To configure  your Cisco router  to do  Port forwarding to your web server you will need to do the following

IP nat inside Source static tcp  "your privet IP address" " Public IP Address "  80  extendable

The above command will do the  NAT port forward  but you will need to add  ACL.

Access-list 171 permit tcp any host “Public IP Address " eq 80

And case it was HTTPs you will use 443 instead of port 80 .

Hope it will help

View solution in original post

Highlighted

Thank you very much it has worked fine, that was excellent