07-07-2018 09:41 PM - edited 03-05-2019 10:44 AM
I am wondering how I can setup a PC to port forward with the Cisco 2821 I will need to port forward 3443 on 10.10.10.100, 255.255.255.0
07-07-2018 11:44 PM
If i understand your question correctly
you want to port forward to PC using 2821.
Hopefully your setup as below :
Outside network ----2821-PC ? if this is correct, then follow the setup.
enable NAT on the interface :
use below nat command to foward :
ip nat inside source static tcp/udp sourceip port destination-ip port - if it outside to inside use outside.
BB
07-09-2018 04:01 PM
07-10-2018 04:23 AM - edited 07-10-2018 04:24 AM
int f0/0
desc OUTSIDE
ip nat outside
int f0/1
desc INSIDE
ip nat inside
ip nat inside source static tcp 10.10.10.2 3443 interface fa0/0 3443
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide