Hello Everyone,
We have 1 router in HQ and 1 in remote location.
I am testing the dial back out line but it is not working.
when i am trying to start dial back from HQ router:
HARCVPN3#xyz
Trying xyz(192.168.27.252)...
% Connection timed out; remote host not responding
this is the debug on remote router:
XYZVPN1#
*Jun 4 11:00:11.836: ISDN BR0/0/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 0 tei 127 ces 0 ev 0x3
*Jun 4 11:00:11.840: %LINK-3-UPDOWN: Interface BRI0/0/0:1, changed state to up
*Jun 4 11:00:11.840: %ISDN-6-CONNECT: Interface BRI0/0/0:1 is now connected to 9621762219 N/A
*Jun 4 11:00:12.220: %DIALER-6-BIND: Interface BR0/0/0:1 bound to profile Di44
*Jun 4 11:00:13.224: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0/0:1, changed state to up
*Jun 4 11:02:12.220: %ISDN-6-DISCONNECT: Interface BRI0/0/0:1 disconnected from 9621762219 grammerwart, call lasted 120 seconds
*Jun 4 11:02:12.352: %LINK-3-UPDOWN: Interface BRI0/0/0:1, changed state to down
*Jun 4 11:02:12.352: %DIALER-6-UNBIND: Interface BR0/0/0:1 unbound from profile Di44
*Jun 4 11:02:13.352: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0/0:1, changed state to down
Please help.
Regards
