Problem with Cisco 870 and no-ip DDNS

[Emmanouil Patiniotakis]

Hello,

I have setup my cisco 870 for ddns with no-ip.com but it does not work. When i press "show ip ddns update" I get "Update Destination not available" and even i have ddns debug on no messages are showing. The config is:

ip ddns update method noip

HTTP

  add http:/YYYYYYY:XXXXXXX@dynupdate.no-ip.com/nic/update?hostname=<h>&myip=<a>

interval maximum 0 5 0 0

interval minimum 0 0 2 0

!

interface Dialer1

mtu 1492

ip ddns update hostname KKKKK.zapto.org

ip ddns update noip

Is anyone out there who can help me?

[Sandeep Choudhary]

Looking at your config, If you don't have it now, you will need

ip domain lookup

Other than that it should work.

if still now works then plz try to debug and paste the output.

Regards

please rate if it helps.

[Emmanouil Patiniotakis]

Thanks for your answer...I have this command on my config. Nothing is happening, nor debug messages are showed up...