cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
13430
Views
0
Helpful
5
Replies

Problem with Sensor Temperature ASR 1000

RonaldJCM
Level 1
Level 1

I am monitoring a Router ASR 1000 with a monitoring software called zenoss, this software works with the SNMP agent, when I tried to get the temperature graph from the router, it dont show me anything, i believe that the router didnt recognize the temperature Oid from zenoss, in this case

1.3.6.1.4.1.9.9.13.1.3.1.3

What can i do to achive that the ASR 1000's sensor temperature show me the value?

how can i active the sensor temperute in this router (ASR 100)?

1 Accepted Solution

Accepted Solutions

Soraya Golbeg
Level 1
Level 1

Hi Ronald,

The 1.3.6.1.4.1.9.9.13.1.3.1.3 OID is part of the CISCO-ENVMON-MIB.

This MIB is not supported on the ASR.

For this platform, it would be better to use the CISCO-ENTITY-SENSOR-MIB:

http://www.cisco.com/en/US/partner/docs/routers/asr1000/mib/guide/asr1mib3.html#wp2089514

You would specifically be interested in the following OIDS:entSensorType and entSensorValue.

The 'sh env all' will allow you to check if you are retrieving the right values.

Hope this helps!

Cheers,

soraya

 

View solution in original post

5 Replies 5

Soraya Golbeg
Level 1
Level 1

Hi Ronald,

The 1.3.6.1.4.1.9.9.13.1.3.1.3 OID is part of the CISCO-ENVMON-MIB.

This MIB is not supported on the ASR.

For this platform, it would be better to use the CISCO-ENTITY-SENSOR-MIB:

http://www.cisco.com/en/US/partner/docs/routers/asr1000/mib/guide/asr1mib3.html#wp2089514

You would specifically be interested in the following OIDS:entSensorType and entSensorValue.

The 'sh env all' will allow you to check if you are retrieving the right values.

Hope this helps!

Cheers,

soraya

 

I am monitoring a Router ASR1000 with a software called Zenoss, which works with SNMP Agent. In Zenoss I am using The

1.3.6.1.4.1.9.9.91.1.1.1.1.4 OID (entSensorValue) to get the  values of many sensors in the device (ASR1000). the Sensor Values, which  I get in the router are:

ASR-ROSAL-01#sh environment all

Sensor List:  Environmental Monitoring

Sensor           Location          State             Reading

V1: VMA          1                 Normal            1098 mV

V1: VMB          1                 Normal            1196 mV

V1: VMC          1                 Normal            1499 mV

V1: VMD          1                 Normal            1791 mV

V1: VME          1                 Normal            2495 mV

V1: VMF          1                 Normal            3291 mV

V1: 12v          1                 Normal            11953 mV

V1: VDD          1                 Normal            3295 mV

V1: GP1          1                 Normal            754 mV

V1: GP2          1                 Normal            900 mV

V2: VMB          1                 Normal            1196 mV

V2: 12v          1                 Normal            11938 mV

V2: VDD          1                 Normal            3300 mV

V2: GP2          1                 Normal            905 mV

Temp: Left       1                 Normal            22 Celsius

Temp: Center     1                 Normal            24 Celsius

Temp: Asic1      1                 Normal            35 Celsius

Temp: Right      1                 Normal            20 Celsius

V1: VMA          F1                Normal            1796 mV

V1: VMB          F1                Normal            1196 mV

V1: VMC          F1                Normal            1196 mV

V1: VMD          F1                Normal            1098 mV

V1: VME          F1                Normal            1000 mV

V1: VMF          F1                Normal            747 mV

V1: 12v          F1                Normal            11923 mV

V1: VDD          F1                Normal            3305 mV

V1: GP1          F1                Normal            905 mV

V2: VMA          F1                Normal            3291 mV

V2: VMB          F1                Normal            2495 mV

V2: VMC          F1                Normal            1494 mV

V2: VMD          F1                Normal            1196 mV

V2: VME          F1                Normal            1098 mV

V2: VMF          F1                Normal            996 mV

V2: 12v          F1                Normal            11865 mV

V2: VDD          F1                Normal            3305 mV

V2: GP1          F1                Normal            749 mV

Temp: Inlet      F1                Normal            24 Celsius

Temp: Asic1      F1                Normal            37 Celsius

Temp: Exhaust1   F1                Normal            35 Celsius

Temp: Exhaust2   F1                Normal            36 Celsius

Temp: Asic2      F1                Normal            30 Celsius

V1: VMA          F0                Normal            1791 mV

V1: VMB          F0                Normal            1191 mV

V1: VMC          F0                Normal            1196 mV

V1: VMD          F0                Normal            1098 mV

V1: VME          F0                Normal            996 mV

V1: VMF          F0                Normal            747 mV

V1: 12v          F0                Normal            11923 mV

V1: VDD          F0                Normal            3305 mV

V1: GP1          F0                Normal            908 mV

V2: VMA          F0                Normal            3291 mV

V2: VMB          F0                Normal            2495 mV

V2: VMC          F0                Normal            1499 mV

V2: VMD          F0                Normal            1201 mV

V2: VME          F0                Normal            1098 mV

V2: VMF          F0                Normal            996 mV

V2: 12v          F0                Normal            11850 mV

V2: VDD          F0                Normal            3305 mV

V2: GP1          F0                Normal            749 mV

Temp: Inlet      F0                Normal            23 Celsius

Temp: Asic1      F0                Normal            38 Celsius

Temp: Exhaust1   F0                Normal            36 Celsius

Temp: Exhaust2   F0                Normal            36 Celsius

Temp: Asic2      F0                Normal            30 Celsius

V1: VMA          0                 Normal            1093 mV

V1: VMB          0                 Normal            1201 mV

V1: VMC          0                 Normal            1499 mV

V1: VMD          0                 Normal            1796 mV

V1: VME          0                 Normal            2495 mV

V1: VMF          0                 Normal            3291 mV

V1: 12v          0                 Normal            11953 mV

V1: VDD          0                 Normal            3300 mV

V1: GP1          0                 Normal            751 mV

V1: GP2          0                 Normal            900 mV

V2: VMB          0                 Normal            1196 mV

V2: 12v          0                 Normal            11923 mV

V2: VDD          0                 Normal            3295 mV

V2: GP2          0                 Normal            900 mV

Temp: Left       0                 Normal            23 Celsius

Temp: Center     0                 Normal            26 Celsius

Temp: Asic1      0                 Normal            36 Celsius

Temp: Right      0                 Normal            21 Celsius

PEM Iout         P0                Normal            17 A

PEM Vout         P0                Normal            12 V AC

PEM Vin          P0                Normal            121 V AC

Temp: PEM        P0                Normal            25 Celsius

Temp: FC         P0                Fan Speed 65%     18 Celsius

PEM Iout         P1                Normal            17 A

PEM Vout         P1                Normal            12 V AC

PEM Vin          P1                Normal            119 V AC

Temp: PEM        P1                Normal            25 Celsius

Temp: FC         P1                Fan Speed 65%     17 Celsius

V1: VMA          R0                Normal            1103 mV

V1: VMB          R0                Normal            3295 mV

V1: VMC          R0                Normal            2495 mV

V1: VMD          R0                Normal            1796 mV

V1: VME          R0                Normal            1499 mV

V1: VMF          R0                Normal            1206 mV

V1: 12v          R0                Normal            11909 mV

V1: VDD          R0                Normal            3281 mV

V1: GP1          R0                Normal            903 mV

V1: GP2          R0                Normal            1228 mV

Temp: CPU        R0                Normal            25 Celsius

Temp: Outlet     R0                Normal            24 Celsius

Temp: Inlet      R0                Normal            17 Celsius

Temp: Asic1      R0                Normal            25 Celsius

V1: VMA          R1                Normal            1113 mV

V1: VMB          R1                Normal            3315 mV

V1: VMC          R1                Normal            2519 mV

V1: VMD          R1                Normal            1806 mV

V1: VME          R1                Normal            1508 mV

V1: VMF          R1                Normal            1215 mV

V1: 12v          R1                Normal            11967 mV

V1: VDD          R1                Normal            3295 mV

V1: GP1          R1                Normal            908 mV

V1: GP2          R1                Normal            1259 mV

Temp: CPU        R1                Normal            24 Celsius

Temp: Outlet     R1                Normal            24 Celsius

Temp: Inlet      R1                Normal            17 Celsius

Temp: Asic1      R1                Normal            23 Celsius

I woulk like to know which of this Values in the list is the device's temperature (Chassis temperature)? and what is the specific Oid to get that particular Value (Chassis temperature)?

I was wondering What is the health range of the device's temperature (Router ASR1000)? what is the value of temperature which i can take as threshold to the router ASR1000?

You can find the Names to the Values int the entPhysicalTable.

OID: 1.3.6.1.2.1.47.1.1.1

For Inlet This would be:

SNMPv2-SMI::mib-2.47.1.1.1.1.7.7031 = STRING: "Temp: Inlet R0/30"

With the Value:

SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.7031 = INTEGER: 25
 

RonaldJCM
Level 1
Level 1

thank you!

mhiyoshi
Level 3
Level 3

Hello Soraya

 

Please let me know more detail of this tips.

CISCO-ENVMON-MIB itself is unsupported, but the substitution is CISCO-ENTITY-SENSOR-MIB on ASR 1K right?

 

Best Regards,

Masanobu Hiyoshi

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: