hello.
I have a problem with a cisco 2600 router.
in that router I have two T1 internet conections.
each connection in every serial port.
well... the problem is..:
when both conections are working at the same time my conection speed is 100 Kb/s!!when I should have 3 Mb/s.
when I shutdown one of the serial ports my conection speed increase to 1.5 Mb/s(the normal speed of a T1 conection)
doesn't matter wich one of the serial ports I shut down...\
I think the problem is when the two serial are working at the same time.
Router#Show ip route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
154.136.0.0/30 is subnetted, 2 subnets
C 154.136.122.148 is directly connected, Serial 0/1
C 154.136.122.112 is directly connected, Serial 0/0
C 10.0.0.0/8 is directly connected, FastEthernet0/1
S* 0.0.0.0/8 is directly connected, Serial 0/1
(here is a blank space)is directly connected, Serial 0/0
Router#
Please, help me, if you need more information please ask to me.
thank you very much
