06-16-2005 07:12 AM - edited 03-03-2019 09:49 AM
Hi...
I have a QOS configuration on cisco router 2600:
-------------------------------------
class-map match-any CLASS_MULTIMIDIA
match dscp ef
match access-group named MTM
!
policy-map QOS_MPLS
class CLASS_MULTIMIDIA
priority 644
set ip dscp ef
class class-default
fair-queue
---------------------------------------
I have two PCs, first one, is sending packets already marked with DSCP EF, and the second isn´t. Then I did a ACL to mark packets from second PC.
When the only second PC start the traffic, with 256K, the policy in output serial interface is dropping average 3K, and I have bandwidth available.
When first PC start traffic dont have problems
PCs are in same LAN.
WHY?
06-16-2005 08:59 AM
Hello,
what is your named access-list MTM matching on ? Can you post the entire configuration of your router ?
Regards,
GP
06-16-2005 09:49 AM
ACL
ip access-list extended MTM
permit ip host 10.232.1.1 10.232.0.0 0.0.255.255
This QoS configurations is to ConferenceVideo.
Thanks
CLRGomes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide