10-31-2017 09:35 AM - edited 03-05-2019 09:24 AM
Hi there
I'am trying to mark incomming traffic on a router 891.
Setup is:
Client - 891 int G0 (L2, VLAN 110)
The Policy looks as follows:
policy-map Pol_Marking
class Class_Marking_Printer
set ip precedence 2
class-map match-all Class_Marking_Printer
description class-map Printer Traffic
match access-group name Traffic_to_Spooler
ip access-list extended Traffic_to_Spooler
remark Filterung des Printer Verkehrs zum Spooler
permit ip any x.x.x.x m.m.m.m
At this point i'am not sure wheter to apply to policy to the physiacla int G0 or the VLAN 110 Int.
I acutally tried both with no success.
int vlan 110
service-policy input Markierung_VRF
Is there a possibility to mark incomming trafic?
Thanks a lot!
Edi
10-31-2017 10:13 AM
10-31-2017 11:22 AM
Correction
on the incooming Interface i applied the correct policy. now it reads:
int vlan 110
service-policy input Pol_Marking
unfortunatly this did not help!
10-31-2017 11:55 AM
11-01-2017 09:16 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide