06-10-2008 03:41 AM - edited 03-03-2019 10:18 PM
Dear sir,
We have point to multipoint application connected via FHDMA wireless radio.in head office and branche office having 2800 routers having fxo and fxs cords.
In headoffice 2801 having 2 port fxo cord we connected 1 analog pone and remote having 2801 router having fxs cord we connected analog phone to fxs port.
Now we want communicate head office to all remote brances and all remote branches has to communicate head office.
how can i configure the router plz give some example.
Thanks&Regards
srini
06-10-2008 04:08 AM
Hey Srini,
You are same srini who used to come to pho right?
This issue is still going on man?
-> Sushil
06-10-2008 04:43 AM
Hi Srini,
As far as I understand the FXS card needs to be connected to the Analog Phone and the FXO card can be connected to either PBX or PSTN not to any analog phones.
Please let us understand if it is so.
http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b53c7.shtml
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094fac.shtml
Please rate if it helps,
Kind Regards,
Wilson Samuel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide