Welcome to the Cisco Community Ask Me Anything EventWe invite you to participate in our upcoming Ask Me Anything (AMA) conversation. Please submit your questions from Monday, June 1, 2026, through Tuesday, June 30, 2026. Our experts Ashwin Murali (En...
Forum Posts
I have a C8000v SDWAN edge running IOS-XE 17.15.3a, it acts as a transit hub for the SDWAN sites to connect to a PaloAlto firewall. It is deployed on KVM hypervisor with 8vCPU and 16G RAM. With such resource I expect it to handle at least 2Gbps throu...
I have two C8KV routers onboarded on vManage (cloud-deliverd/Cisco managed), licenses have been assigned, site id, system ip, org name all correct.On the edge routers, 2 x vsmart and 1 x vmanage connections are showing up without any errors. But vMan...
Resolved! unnumbered interface bahaviour
in IOS XE, when you configure an unnumbered interface to borrow address from another interface other than loopback, it will not show up in RIB thus is not able to return the traffic. a static route needs to be configured to point to the unnumbered in...
HelloWe try to activate subinterfaces on IE-3400-8P2S, with software 17.12.05 (Network Advantage)However we have no IP connectivity over the subinterface, only over the global interface.The config------------interface GigabitEthernet1/3no switchporti...
I'm trying to setup a Cisco C881W-E-K9 router in my home office. It will be replacing a Cisco rv325. I want to have these features: support for 10 or more devices wanting an IP address and internet access, VPN (L2TP and PPTP) access from the internet...
Hi , am trying to use vCSR router as vEdge SDWAN for lab practice, but am not able to convert to SDWAN Controller. am using the following IOS XE Version . How can I convert to SDWAN controller mode. Router#show versionCisco IOS XE Software, Version ...
Welcome to the Cisco Community Ask Me Anything EventWe invite you to participate in our upcoming Ask Me Anything (AMA) conversation. Please submit your questions from Monday, June 1, 2026, through Tuesday, June 30, 2026. Our experts Ashwin Murali (En...
Hi. As per title, is it possible to have multiple public IP addresses associated with a vMX in Azure? Thanks
It's been quite a few days since I started learning SD-WAN through YouTube. And as I move forward, I have this question from others: "Why are you learning SD-WAN in the era of AI?" Is it even necessary?I kept searching and found a few answers... Plea...
Hello,I have C8300 router with T1 licence. I am on version 17.14.1a so i have 500mbps aggregate. I upgrade router on recommended version 17.15.4c, and than output of command show version shows: The current crypto throughput level is 2000000 kbps (Agg...
Resolved! Error message on a Cisco router
Hi, I'm currently studying or at least trying to study for the CCNA exam and bought a Cisco 1800 series router to play around with and get some real hands on experience. It seems to mostly work ok but I keep getting an error message, see screenshot ...
Resolved! Issue with control connection
Hi all, I have a Cisco hosted and managed SDWAN controllers and trying to add up a new router C8200. I am directly connecting internet link on routers which means public IP on interfaces. system config is good, defined vBond IP manually. interfaces ...
Didn't seem like this bug was resolved on PID: ASR-920-24SZ-MASR-920-24SZ-M(config-if)#do sh ver | inc IOSCisco IOS XE Software, Version 17.12.05Cisco IOS Software [Dublin], ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 17.12.5, RELEASE...
Hi all. I award a gold star to whoever can figure this out. Been banging my head searching for any alternative or workaround. Even opened up a Meraki case for it, however after receiving an "AI" type hallucinated response and me calling them out o...
We currently have a vMX Small acting as a one-arm concentrator. It has an Azure public IP but there is no firewall upstream of it. We want to either 1. deploy a second vMX as an edge firewall + Client VPN server (50 max client vpn tunnels is and 200m...
