06-02-2006 01:38 PM - edited 03-03-2019 12:53 PM
I have a DR site in Dallas Tx (please see attached network layout) connecting to Corporate Data Center in California via EIGRP, all DR servers in Dallas are in VLAN 124. And what I am trying to achieve is when I do testing on DR servers in Dallas I want to isolate VLAN 124 from the rest of the network but still need to be able to connect to DR servers from Corporate Data Center in California. Does anybody know how accomplish this ?
Any suggestions/inputs will be highly appreciated !!!
06-02-2006 02:47 PM
You can put a VLAN acl (when you do DR testing) on the 6500 which restricts access from only the network in California Data center.
06-02-2006 04:14 PM
I need to be able to access the DR servers in Dallas via the WAN when doing DR testing and DR VLAN is off the network.
Thanks !!!
Danny
06-04-2006 05:03 AM
Hi,
I too feel putting an acl for VLAN should help but I feel this acl should be placed on the router and can be removed once testing is over
Thanks!!
Ganesh
06-04-2006 11:42 PM
Hi,
For this case you would have another method also. wht you can do is assign vlan124 as pvlan isolated so it would`nt be acess form any other vlan in same network.
hope this could help you..
Regards,
Gopal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide