RV325

[pierre.r.scott]

I want to increase the maximum available number of IP addresses that DHCP can allocate, but when I try to go beyond .149 it comes up with an error saying that  "PPTP IP and SSL IP" range overlap.   We do not need either of these, but I cannot find where I can disable them so that I can extend the range

Thanks for your help

[luis_cordova]

Hi @pierre.r.scott ,

You could go to the configuration of those protocols and alter the ip range.

That will enable you to enlarge your DHCP pool.

I leave these links for reference.

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4359-configure-point-to-point-tunneling-protocol-pptp-server-on-r.html

https://www.cisco.com/c/es_mx/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4348-configure-advanced-secure-sockets-layer-virtual-private-netw.pdf

Regards

[Deepak Kumar]

Hi,

The Range overlap means same range of IP subnet you had assigned on another interface of the router. So first of all check all other interfaces/VPN configuration Pool for any overlapping the subnet mask.