Show IP DHCP Pool does not show client-identifier

[trapneto]

I did this:

895VA(config)#ip dhcp pool Board

895VA(dhcp-config)#client-identifier 01E4.54E8.15E2.59

895VA(dhcp-config)#host 10.10.10.103 255.255.255.0

Show IP DHCP Pool shows this:

Pool Board :

 Utilization mark (high/low)    : 100 / 0

 Subnet size (first/next)       : 0 / 0

 Total addresses                : 1

 Leased addresses               : 1

 Pending event                  : none

 0 subnet is currently in the pool :

 Current index        IP address range                    Leased addresses

 10.10.10.103         10.10.10.103     - 10.10.10.103      1

Why isn’t the client identifier shown?  Will this reservation work?

[MHM Cisco World]

show ip dhcp binding 

[balaji.bandi]

#show ip dhcp bind

Bindings from all pools not associated with VRF:

IP address          Client-ID/       Lease expiration        Type

     Hardware address/

     User name

192.168.1.6        xxxx.xxxx.xxxx          Oct 31 2022 17:00    XXXXXX