01-25-2018 05:11 AM - edited 03-05-2019 09:49 AM
there is a way to terminate the SIP calls, it happens that calls get stuck and I need to restart the router to be able to remove the connections.
#show call active voice compact
<callID> A/O FAX T<sec> Codec type Peer Address IP R<ip>:<udp>
Total call-legs: 10
2661 ANS T2895 g711alaw VOIP P855362 172.16.15.108:26972
2662 ORG T2895 g711alaw VOIP P988449290 10.182.202.138:51430
3074 ANS T623 g711alaw VOIP P855323 172.16.15.119:23848
3075 ORG T623 g711alaw TELE P0996627041
3165 ANS T107 g711alaw VOIP P855357 172.16.15.109:31542
3166 ORG T107 g711alaw VOIP P025888100 172.31.103.101:36508
3171 ANS T0 g711alaw VOIP P855368 172.16.15.110:30856
3172 ORG T0 g711alaw VOIP P0219821089897 189.52.92.157:41124
3186 ANS T0 g711alaw VOIP P855349 172.16.15.113:22072
3187 ORG T0 None TELE P0997885470
Solved! Go to Solution.
01-27-2018 04:35 AM
Use the clear call voice command:
VG1#clear call voice causecode ?
<1-127> Q.850 disconnect cause code numbers
VG1#clear call voice causecode 1 ?
called-number clear only call with specific called number pattern
calling-number clear only call with specific calling number pattern
fpi-correlator clear call based on VoIP FPI correlator
fpi-stale clear all hung fpi call
id clear only call with specific id
long-dur-call clear only call with long-duration being detected
media-inactive clear only call with media inactive being detected
VG1#clear call voice causecode 1 id 123
01-25-2018 09:28 AM
Mateus,
I recommend you post this to the Cisco Support Community for more information and trouble shooting help specific to your particular issue.
Cisco Support Community - Cisco Support Community
Kelli Glass
Moderator for Cisco Customer Communities
01-27-2018 04:35 AM
Use the clear call voice command:
VG1#clear call voice causecode ?
<1-127> Q.850 disconnect cause code numbers
VG1#clear call voice causecode 1 ?
called-number clear only call with specific called number pattern
calling-number clear only call with specific calling number pattern
fpi-correlator clear call based on VoIP FPI correlator
fpi-stale clear all hung fpi call
id clear only call with specific id
long-dur-call clear only call with long-duration being detected
media-inactive clear only call with media inactive being detected
VG1#clear call voice causecode 1 id 123
02-19-2018 05:38 AM
Tks shawngennuso!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide