12-17-2018 02:24 PM - edited 03-05-2019 11:07 AM
Hi all,
I have a problem with 4948E, trying to configure SNMPv3 with priv aes but there is no option for aes , is that because IPBASE image?
Thank you in advance.
Regards
12-17-2018 02:31 PM
Can you post show version full.
12-17-2018 02:37 PM
BB,
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASE-M), Version 15.0(2)SG2, RELEASE SOFTWARE (fc3)
12-17-2018 02:41 PM
can you post show version full output.
12-17-2018 02:47 PM
Sorry,
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASE-M), Version 15.0(2)SG2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 07-Dec-11 20:14 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x12AFDD2C
ROM: 12.2(44r)SG11
Hobgoblin Revision 21, Fortooine Revision 1.32
AS08-BC-CAR01R24-BASAR uptime is 5 years, 2 weeks, 10 hours, 14 minutes
System returned to ROM by power-on
System restarted at 13:13:07 CET Wed Dec 4 2013
System image file is "bootflash:cat4500e-ipbase-mz.150-2.SG2.bin"
cisco WS-C4948E (MPC8548) processor (revision 8) with 1048576K bytes of memory.
Processor board ID CAT1641S295
MPC8548 CPU at 1GHz, Cisco Catalyst 4948E
Last reset from PowerUp
2 Virtual Ethernet interfaces
48 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide