cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
989
Views
0
Helpful
2
Replies

SPA 8XCHT1 E1 ASR 1004

Hello Community Team,

 

I have an error  in this card.

The show platform issues the following error:

 

ASR-1004-IBM#show platform
Chassis type: ASR1004             

Slot      Type                State                 Insert time (ago) 
--------- ------------------- --------------------- ----------------- 
0         ASR1000-SIP10       ok                    28w1d         
 0/0      SPA-8XCHT1/E1-V2    out of service        00:15:41      
 0/1      SPA-2X1GE-V2        ok                    28w1d         
 0/2      SPA-2X1GE-V2        ok                    28w1d         
R0        ASR1000-RP2         ok, active            28w1d         
F0        ASR1000-ESP10       ok, active            28w1d         
P0        ASR1004-PWR-AC      ok                    28w1d         
P1        ASR1004-PWR-AC      ok                    28w1d         

Slot      CPLD Version        Firmware Version                        
--------- ------------------- --------------------------------------- 
0         09111601            12.2(33r)XNC                        
R0        13092401            15.2(1r)S                           
F0        09111601            12.2(33r)XNC                        

The Logging output 

 

 

 

006944: Mar 11 14:52:42.285: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0
006945: Mar 11 14:54:42.340: %SPA_PLUGIN-3-RETRY_EXHAUSTED: SIP0/0: SPA-8XCHT1/E1-V2[0/0]: plugin initialization failed(retries exhausted). host_status(0x00000001), spa_status(0x00000907)
006946: Mar 11 14:54:47.344: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/0: Attempting recovery by reloading SPA
006947: Mar 11 14:54:47.344: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0
006948: Mar 11 14:55:13.702: %IOSXE-3-PLATFORM: F0: cpp_cp: QFP:0.0 Thread:003 TS:00017037644160891833 %IPSEC-3-REPLAY_ERROR: IPSec SA receives anti-replay error, DP Handle 187, src_addr 10.70.0.86, dest_addr 10.70.0.66, SPI 0x1c1b39f4
006949: Mar 11 14:56:47.416: %SPA_PLUGIN-3-RETRY_EXHAUSTED: SIP0/0: SPA-8XCHT1/E1-V2[0/0]: plugin initialization failed(retries exhausted). host_status(0x00000001), spa_status(0x00000907)
006950: Mar 11 14:56:52.420: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/0: Attempting recovery by reloading SPA
006951: Mar 11 14:56:52.421: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0
006952: Mar 11 14:58:52.494: %SPA_PLUGIN-3-RETRY_EXHAUSTED: SIP0/0: SPA-8XCHT1/E1-V2[0/0]: plugin initialization failed(retries exhausted). host_status(0x00000001), spa_status(0x00000907)
006953: Mar 11 14:58:57.498: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/0: Attempting recovery by reloading SPA
006954: Mar 11 14:58:57.498: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0
006957: Mar 11 15:00:57.593: %SPA_OIR-3-SPA_POWERED_OFF: subslot 0/0: SPA 8xCHT1/E1-V2 SPA powered off after 5 failures within 1200 seconds
006958: Mar 11 15:00:57.594: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0
006959: Mar 11 15:00:57.589: %SPA_PLUGIN-3-RETRY_EXHAUSTED: SIP0/0: SPA-8XCHT1/E1-V2[0/0]: plugin initialization failed(retries exhausted). host_status(0x00000001), spa_status(0x00000907)

 

Any ideas.

 

Thanks in advance

 

José Alejandro Rodríguez R

 

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame

This is an optional SPA.  

 

So try to re-seat the SPA and see if the alarm goes away.

Thanks I ll give it a try 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: