still it not booting.
switch: set SWITCH_IGNORE_STARTUP_CFG = 0
switch: set
ABNORMAL_RESET_COUNT=0
ASIC_PCI_RESET=1
AUTOREBOOT_RESTORE=1
BOOT=flash:packages.conf
BOOT_LOADER_UPGRADE_DISABLE=1
BSI=0
BYPASS_STARTUP_CONFIG=
CFG_MODEL_NUM=WS-C3650-24PS-E
CLEI_CODE_NUMBER=INM2N00ARA
CSR_PCIERST_DISCONNECTED=yes
ECI_CODE_NUMBER=471211
MAC_ADDR=78:0C:F0:64:2C:00
MANUAL_BOOT=yes
MODEL_NUM=WS-C3650-24PS
MODEL_REVISION_NUM=S0
MOTHERBOARD_ASSEMBLY_NUM=73-15899-07
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=FDO221801Q8
POE1_ASSEMBLY_NUM=73-16439-02
POE1_REVISION_NUM=A0
POE1_SERIAL_NUM=FDO22170VLM
RANDOM_NUM=1356248583
RECOVERY_BUNDLE=sda9:cat3k_caa-recovery.bin
SWITCH_IGNORE_STARTUP_CFG== 0
SWITCH_NUMBER=1
SYSTEM_SERIAL_NUM=FDO2218E08K
TAN_NUM=800-41244-04
TAN_REVISION_NUMBER=C0
TEMPLATE=advanced
TERMLINES=0
VERSION_ID=V05
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
Booting...call dfs_loadpartitions, retry = 1
call dfs_loadpartitions, retry = 0
usbflash0
contains unexpected values in partition table or boot sector.
Device needs formatting before use!
Interface GE 0 link down***ERROR: PHY link is down
The system is not configured to boot automatically. The
following command will finish loading the operating system
software:
boot
switch: ?
? -- Present list of available commands
arp -- Show arp table or arp-resolve an address
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
emergency-install -- Initiate Disaster Recovery
flash_init -- Initialize filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
mgmt_init -- initialize management port
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
ping -- Send ICMP ECHO_REQUEST packets to a network host
readrtc -- Read RTC
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
writertc -- Write RTC
switch: format usbflash0:
Format of filesystem "usbflash0:" not supported!
switch: boot packages.conf
packages.conf: no such device
Cannot open file packages.conf
usage: boot [<filename>] [<cmdline>]
switch: dir flash:
Directory of flash:/
46465 drwx 4096 .
2 drwx 4096 ..
46466 -rw- 83293932 cat3k_caa-base.SPA.03.06.06E.pkg
46467 -rw- 3982012 cat3k_caa-drivers.SPA.03.06.06E.pkg
46468 -rw- 33788908 cat3k_caa-infra.SPA.03.06.06E.pkg
46469 -rw- 43074880 cat3k_caa-iosd-universalk9.SPA.152-2.E6.pkg
46470 -rw- 28394380 cat3k_caa-platform.SPA.03.06.06E.pkg
46471 -rw- 111233856 cat3k_caa-wcm.SPA.10.2.160.0.pkg
46472 -rw- 1236 packages.conf
77441 drwx 4096 dc_profile_dir
46473 -rw- 2097152 nvram_config
46474 -rw- 1576 vlan.dat
1313103872 bytes available (334790656 bytes used)
switch: boot flash:packages.conf
Getting rest of image
Reading full image into memory...Check base package header ...: done = 16384
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 83293932
Bundle Image
--------------------------------------
Kernel Address : 0x5343234c
Kernel Size : 0x41852f/4293935
Initramfs Address : 0x5384a87c
Initramfs Size : 0xe7766d/15169133
Compression Format: .mzip
Bootable image at @ ram:0x5343234c
Bootable image segment 0 address range [0x81100000, 0x82140000] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 377
Loading Linux kernel with entry point 0x8166a600 ...
Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
All packages are Digitally Signed
Starting System Services
FIPS(NGWC): Flash Key Check : Begin
FIPS(NGWC): Flash Key Check : End, Not Found, FIPS Mode Not Enabled
MCU type = 2 and image name is main_mcu_ucode_bundle_8_1_0.tar
Final tar file: main_mcu_ucode_bundle_8_1_0.tar
Front-end Microcode IMG MGR: found 1 microcode images for 1 device.
Image for front-end 0: /tmp/microcode_update/front_end/fe_type_8_1
Front-end Microcode IMG MGR: Preparing to program device microcode...
Front-end Microcode IMG MGR: Preparing to program device[0]...83664 bytes.
Front-end Microcode IMG MGR: Programming device 0...
% Front-end Microcode IMG MGR: address 0, Could not enable sys_poll
% Front-end Microcode IMG MGR: unable to program device: 0
% Front-end Microcode IMG MGR: malformed microcode cache
Jun 20 09:35:22 %PLATFORM_MGR-1-PLATMGR_INIT_FAIL: Platform ManaJun 20 09:35:22 %IOSXE-2-PLATFORM: process ng_dumper: Process platform_mgr: terminated abnormally.
Jun 20 09:35:23 %IOSXE-2-PLATFORM: process platform_mgr: ===================== Exception Data ====================
Jun 20 09:35:23 %IOSXE-2-PLATFORM: process platform_mgr: Exception in 'platform_mgr' with Signal=SIGABRT(6)
Jun 20 09:35:23 %IOSXE-2-PLATFORM: process platform_mgr: Frame Pointer=0x7FCB2B50, Program Counter=0x2C6A63B0
Jun 20 09:35:23 %IOSXE-2-PLATFORM: process platform_mgr: Thread ID=6015: -Traceback= 1#488249e9d04d3bc04e066fb31efe7654 pthread:2C694000+123B0
Jun 20 09:35:23 %IOSXE-2-PLATFORM: process platform_mgr:
<Tue Jun 20 09:35:22 2023> Message from sysmgr: Reason Code:[2] Reset Reason:Service [platform_mgr] pid:[6015] terminated abnormally [6].
Service: platform_mgr
Description: 3K Platform Manager
Executable: /tmp/sw/mount/cat3k_caa-platform.SPA.03.06.06E.pkg//usr/binos/bin/platform_mgr
Started at Tue Jun 20 09:34:14 2023 (257613 us)
Stopped at Tue Jun 20 09:35:22 2023 (528914 us)
Uptime: 1 minutes 8 seconds
Start type: SRV_OPTION_RESTART_STATELESS (23)
Death reason: SYSMGR_DEATH_REASON_FAILURE_SIGNAL (2)
Last heartbeat 0.00 secs ago
PID: 6015
Exit code: signal 6
CWD: /var/sysmgr/work
PID: 6015
UUID: 3008
Unmounting ng3k filesystems...
Unmounted /dev/sda3...
Warning! - some ng3k filesystems may not have unmounted cleanly...
Please stand by while rebooting the system...
Restarting system.
Booting...
Interface GE 0 link down***ERROR: PHY link is down
Getting rest of image
Reading full image into memory...Check base package header ...: done = 16384
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 83293932
Bundle Image
--------------------------------------
Kernel Address : 0x5342e34c
Kernel Size : 0x41852f/4293935
Initramfs Address : 0x5384687c
Initramfs Size : 0xe7766d/15169133
Compression Format: .mzip
Bootable image at @ ram:0x5342e34c
Bootable image segment 0 address range [0x81100000, 0x82140000] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 377
Loading Linux kernel with entry point 0x8166a600 ...
Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
All packages are Digitally Signed
Starting System Services
FIPS(NGWC): Flash Key Check : Begin
FIPS(NGWC): Flash Key Check : End, Not Found, FIPS Mode Not Enabled
MCU type = 2 and image name is main_mcu_ucode_bundle_8_1_0.tar
Final tar file: main_mcu_ucode_bundle_8_1_0.tar
Front-end Microcode IMG MGR: found 1 microcode images for 1 device.
Image for front-end 0: /tmp/microcode_update/front_end/fe_type_8_1
Front-end Microcode IMG MGR: Preparing to program device microcode...
Front-end Microcode IMG MGR: Preparing to program device[0]...83664 bytes.
Front-end Microcode IMG MGR: Programming device 0...
% Front-end Microcode IMG MGR: address 0, Could not enable sys_poll
% Front-end Microcode IMG MGR: unable to program device: 0
% Front-end Microcode IMG MGR: malformed microcode cache
Jun 20 09:40:32 %PLATFORM_MGR-1-PLATMGR_INIT_FAIL: Platform ManaJun 20 09:40:32 %IOSXE-3-PLATFORM: process sysmgr: Service [platform_mgr] pid:[6010] terminated abnormally [6].
Jun 20 09:40:32 %STACKMGR-1-RELOAD: Reloading due to reason
Jun 20 09:40:32 %IOSXE-2-PLATFORM: process ng_dumper: Process platform_mgr: terminated abnormally.
Jun 20 09:40:33 %IOSXE-2-PLATFORM: process platform_mgr: ===================== Exception Data ====================
Jun 20 09:40:33 %IOSXE-2-PLATFORM: process platform_mgr: Exception in 'platform_mgr' with Signal=SIGABRT(6)
Jun 20 09:40:33 %IOSXE-2-PLATFORM: process platform_mgr: Frame Pointer=0x7F7A4B30, Program Counter=0x2C5B13B0
Jun 20 09:40:33 %IOSXE-2-PLATFORM: process platform_mgr: Thread ID=6010: -Traceback= 1#488249e9d04d3bc04e066fb31efe7654 pthread:2C59F000+123B0
Jun 20 09:40:33 %IOSXE-2-PLATFORM: process platform_mgr:
<Tue Jun 20 09:40:32 2023> Message from sysmgr: Reason Code:[2] Reset Reason:Service [platform_mgr] pid:[6010] terminated abnormally [6].
Service: platform_mgr
Description: 3K Platform Manager
Executable: /tmp/sw/mount/cat3k_caa-platform.SPA.03.06.06E.pkg//usr/binos/bin/platform_mgr
Started at Tue Jun 20 09:39:24 2023 (166735 us)
Stopped at Tue Jun 20 09:40:32 2023 (722894 us)
Uptime: 1 minutes 8 seconds
Start type: SRV_OPTION_RESTART_STATELESS (23)
Death reason: SYSMGR_DEATH_REASON_FAILURE_SIGNAL (2)
Last heartbeat 0.00 secs ago
PID: 6010
Exit code: signal 6
CWD: /var/sysmgr/work
PID: 6010
UUID: 3008
