12-21-2011 11:37 AM - edited 03-04-2019 02:43 PM
Hello
I have a 1 port channelized T1/E1 and PRI HWIC (data only) (HWIC-1CE1T1-PRI) Card. I want to know how to configure it, It will be a backup line for the ADSL link which is on static PUBLIC IP through which the remote users are connecting through a Easy VPN.
Please answer the below Question
Can anybody route me to the configuration example for the same.
Thanks
12-22-2011 11:21 AM
Hello Experts,
I have stuck with this Task, Please anybody can share your expierience with me,
Thanks
12-22-2011 12:32 PM
1. Depends on the circuit ordered, If its in the budget order an E1,
2. I would suggest a discussion with your local carrier on what they have to offer. Since this is a backup link, there may be
some options that save some money.
3. Depends on where in the router its installed.
basic config stuff:
this just gets the card setup for the link.... with any luck someone next week will pitch in
12-22-2011 01:33 PM
Thanks miller,
The customer has ordered an ISDN link from the ISP, what type of ISDN configuration to be done on the router so that incase the active link fails the ISDN link should come for the easy vpn users.
Tx.
12-22-2011 01:39 PM
Here is a somewhat dated but still accurate guide.
http://www.cisco.com/en/US/tech/tk713/tk237/technologies_configuration_example09186a00800a3b77.shtml
12-22-2011 02:43 PM
Thanks buddy I will read about the ISDN configuration and get back to you incase if i face any issues in understanding.
Definately i will update the rating, As such u deserve the rating.
12-22-2011 02:59 PM
Fair warning, I'm on vacation next week. I tend to ignore computers then
make sure you get the physical layer configured correctly (reference #1 above).
12-22-2011 03:24 PM
Fair warning, I'm on vacation next week. I tend to ignore computers then
make sure you get the physical layer configured correctly (reference #1 above).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide