t1 implementation

[jjoseph01]

I cant remember if this is the case or not, but I have a customer that has a t1 to another remote site. They are adding another remote site, so my question is this: when adding another remote site, do you have to have another t1 at the main site, or does it just join in to the existing t1?

[Collin Clark]

Assuming the T1's are point to point , then yes each 'site' will require it's own t1 circuit and t1 interface.

HTH and please rate.

[Richard Burts]

John

The answer to your question depends a bit on how the T1 is provisioned. If the T1 is a Frame Relay connection then it is possible for 1 T1 at the head end or HQ site to connect to multiple remote sites. If the T1 is provisioned as a regular leased line (HDLC or PPP) then a second site requires a second T1 connection.

HTH

Rick

[jjoseph01]

Rick, thanks. Thats what I thought, but wanted to verify.