cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
366
Views
0
Helpful
2
Replies

track list boolean and questions

Lei.LIM
Level 1
Level 1

TT.png

 

Hi all

Several tests are under way using this topology.

 

in case R1 - > R7

Only static routing should be used.

 

R1's config

 

track 1 list boolean and
object 2
object 3
!
track 2 ip sla 57 reachability
!
track 3 ip sla 35 reachability

 

ip sla 35
icmp-echo 1.1.35.1 source-interface GigabitEthernet0/1
frequency 5
ip sla schedule 35 life forever start-time now
ip sla 57
icmp-echo 1.1.57.1 source-interface GigabitEthernet0/1
frequency 5
ip sla schedule 57 life forever start-time now

 

ip route 7.7.7.7 255.255.255.255 GigabitEthernet0/1 1.1.13.2 track 1
ip route 1.1.35.0 255.255.255.0 GigabitEthernet0/1 1.1.13.2
ip route 1.1.57.0 255.255.255.0 GigabitEthernet0/1 1.1.13.2
ip route 7.7.7.7 255.255.255.255 GigabitEthernet0/0 1.1.12.2 100

 

in this situation

If even one link between R3-R5 (1.1.35.0) or R5-R7 (1.1.57.0) are disconnected, the routing from R1 to R7 is changed to Gi0/0.

If only R5-R7 (1.1.57.0) is disconnected and Gi0/0/0 of R1 is shut down, routing for 7.7.7.7 is dropped from R1.

Is there a way to change routing to R1->R3->R4->R6->R8->R7 in this situation?
When R5-R7 (1.1.57.0) and R1 Gi0/0 are shut down

 

Many thanks

 

Lei.

 

 

 

2 Replies 2

mlund
Level 7
Level 7

Hi

with "ip route 7.7.7.7 255.255.255.255 GigabitEthernet0/1 1.1.13.2 110" this will kick in when the other 2 fails

/Mikael

Hi Mikael

 

OK I will test it 

 

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: