transmitted utilization of 77 % which is greater than the threshold of

[Network_Sarovani]

Hi Team , 

We have vendor device at remote site and we could see trasmit utlization alert everytime on that link . what are the troubleshooting steps we can perform or how do we resolve this issue ?

Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 77 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 77 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 78 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 78 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 80 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 80 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 81 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 81 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 82 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 82 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 83 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 83 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 86 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 86 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 87 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 87 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 89 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 89 which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 97 % which is greater than the threshold of 75%.
Interface ge2/1 for node CISCO-EDGE-ROUTER has a transmitted utilization of 97 which is greater than the threshold of 75%.

[balaji.bandi]

Can you post the below information to understand the issue :

show version

show Interface ge2/1

show run Interface ge2/1

what is the WAN bandwidth ? what device is this interface connected to ?

[Network_Sarovani]

@balaji.bandi this is OBS device placed at client location . It is 60Mbps link .

[balaji.bandi]

show version
show Interface ge2/1
show run Interface ge2/1

Prefer to see this information from router.

[Joseph W. Doherty]

What is, or how is, the 75% being monitored?

Possibly some system management package that "flags" link utilization above some threshold set within it.(?)

Unclear what kind of resolution you're looking to obtain.  I.e. eliminate the messages or insure traffic doesn't exceed 75%?

[Network_Sarovani]

This is Vendor device placed at the client location . 

Remote site >. Clien_L2 > Client_L3 > OBS Device <<< 60Mbps>>> INTERNET 

[Joseph W. Doherty]

Ok, that answers my first two questions, but still "Unclear what kind of resolution you're looking to obtain. I.e. eliminate the messages or insure traffic doesn't exceed 75%?"

[Georg Pauwen]

Hello,

do you have any QoS configured on CISCO-EDGE-ROUTER ? Post the running configuration of that router, as well as the output of:

show interfaces GigabitEthernet2/1