Hi,
I am trying to configure a vfi on my swicht ME-3600X. I want to have Ethernet Over MPLS multipoint-multipoint. That is why "xconnect" does not work for me. In my CORE with ASR9006 I configure the vfi like this:
interface gigabitethernet0/0/0/2.2 l2transport
description enlace-per-bog-vlan-pw-2
encapsulation dot1q 2 rewrite ingress tag pop 1 symmetric
exit
interface gigabitethernet0/0/0/3.2 l2transport
description enlace-per-bog-vlan-pw-2
encapsulation dot1q 2 rewrite ingress tag pop 1 symmetric
exit
l2vpn
bridge group bg_mst_eje
bridge-domain bd_mst-vlan-2
interface gigabitethernet0/0/0/2.2
interface gigabitethernet0/0/0/3.2
exit
vfi vlan neighbor 10.248.10.1 pw-id 2
(I have to interfaces closing a l2 ring)
I want to know how I can configure something very similar on the ME-3600X. I am running "Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 12.2(52)EY2, RELEASE SOFTWARE (fc1)"
thanks for your help.
