Hello ,
I am configuring voice vlan but there is problem
here my config
test#conf t
Enter configuration commands, one per line. End with CNTL/Z.
test(config)#interface gigabitEthernet 1/0/7
test(config-if)#authentication host-mode single-host (even ı did this ,it doesnt seen)
test(config-if)#end
test#show running-config interface gigabitEthernet 1/0/7
Building configuration...
Current configuration : 172 bytes
!
interface GigabitEthernet1/0/7
switchport mode access
switchport voice vlan 150
authentication port-control auto
dot1x pae authenticator
spanning-tree portfast
end
but it is still triy to authenticate with 802.1x and ı dont want it
*Mar 1 01:57:50.584: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/7: Power granted
*Mar 1 01:57:50.652: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/7, changed state to down
*Mar 1 01:57:53.751: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/7, changed state to up
*Mar 1 01:57:54.752: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/7, changed state to up
*Mar 1 01:57:57.358: %AUTHMGR-5-START: Starting 'dot1x' for client (0080.9fae.13d4) on Interface Gi1/0/7 AuditSessionID AC13FEC800000040006BE843
*Mar 1 01:59:24.489: %DOT1X-5-FAIL: Authentication failed for client (0080.9fae.13d4) on Interface Gi1/0/7 AuditSessionID
what is the right config , please help me (voice vlan config with 802.1x)
