05-10-2010 01:26 PM - edited 03-04-2019 08:26 AM
05-10-2010 01:53 PM
Carlos,
You can configure the Site-to-Site as long as the 1700 supports it (if running the appropiate IOS).
Md5 is the hash algorithm that can be used in phase 1 and phase 2 of the configuration, ie.
crypto isakmp polic 10
hash md5
crypto ipsec transform-set myset esp-3des esp-md5-hmac
Federico.
05-10-2010 01:59 PM
Hi Carlos
This link gives points to a sample scenario and config very similar to your requirement.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805e8c80.shtml
regds
05-10-2010 01:53 PM
Carlos,
You can configure the Site-to-Site as long as the 1700 supports it (if running the appropiate IOS).
Md5 is the hash algorithm that can be used in phase 1 and phase 2 of the configuration, ie.
crypto isakmp polic 10
hash md5
crypto ipsec transform-set myset esp-3des esp-md5-hmac
Federico.
05-10-2010 01:59 PM
Hi Carlos
This link gives points to a sample scenario and config very similar to your requirement.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805e8c80.shtml
regds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide