06-13-2020 07:02 AM
Hi,
I know with Cisco IOS-XE there is the VASI configurations but with Cisco IOS what options do we have to leak traffic between VRFs on same router and NAT?
I'm aware of implementing a global static route into a VRF and NAT but for inter-vrf would it need to be achieved through an export map or another configuration example I'm missing?
Thanks all
George
06-13-2020 12:38 PM
Hello,
not sure if that is what you are after, but have a look at the link below:
https://community.cisco.com/t5/security-documents/nat-with-vrf-ios-vs-ios-xe/ta-p/3156555
06-13-2020 12:40 PM
Hi,
yes, you will require import and export command to archive the same.
Here is an example: https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200158-Configure-Route-Leaking-between-Global-a.html
06-14-2020 06:16 AM
Hello
@georgehewittuk1 wrote:
I'm aware of implementing a global static route into a VRF and NAT but for inter-vrf would it need to be achieved through an export map or another configuration example I'm missing?
Are these separate vrf/s both internally to you network? - can you share a topology diagram of your intentions and preferably attach a file with the current configuration of the NAT/VRF rtr(s)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide