this is what i am getting sir
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: n
Press RETURN to get started!
00:01:33: % Error opening nvram:/ifIndex-table No such file or directory
00:01:35: curr is 0x0
00:01:35: RP: Currently running ROMMON from S (Gold) region
00:01:45: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Versio
n 12.2(33)SXH2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 25-Apr-08 08:07 by prod_rel_team
00:00:09: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure con
sole debugging output.
00:01:32: SP: SP: Currently running ROMMON from S (Gold) region
00:01:45: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M), Versio
n 12.2(33)SXH2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 25-Apr-08 08:20 by prod_rel_team
00:01:45: %DOSFS-SP-5-DIBERR: disk0 is formatted from a different router or PC.
A format in this router is required before an image can be booted from this devi
ce
00:01:45: %SYS-SP-6-BOOTTIME: Time taken to reboot after reload = 62041 seconds
00:01:46: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:46: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:01:46: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:46: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
00:01:46: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system i
s operating on both power supplies.
00:01:49: %C6KENV-SP-4-FANHPMODE: Fan-tray 1 is operating in high power mode
00:01:54: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in
slot 6.
00:01:54: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 6
became active.
Router>
Router>
Router>
Router>
%Software-forced reload
17:40:11 UTC Sun Jan 2 2000: Breakpoint exception, CPU signal 23, PC = 0x425F82
D0
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
-Traceback= 425F82D0 425F5E8C 42335714 42335740 421C3A10 4220E678 4220E6D4 40845
35C 40845DDC 422C55B0 422C184C 422C1A68 425EB30C
$0 : 00000000, AT : 43B40000, v0 : 456C0000, v1 : 44570000
a0 : 50B40B70, a1 : 0000F100, a2 : 00000000, a3 : 00000000
t0 : 425EB928, t1 : 3400F101, t2 : 425EB938, t3 : FFFF00FF
t4 : 425EB928, t5 : 00002E32, t6 : 40000000, t7 : 00000000
s0 : 00000000, s1 : 43B10000, s2 : 46982F78, s3 : 0000001F
s4 : 00000040, s5 : 46982F78, s6 : 44B60000, s7 : 00000000
t8 : 5000DBBC, t9 : 00000004, k0 : 00000000, k1 : 00000000
gp : 43B49090, sp : 5000DC68, s8 : 00000000, ra : 425F5E8C
EPC : 425F82D0, ErrorEPC : 81080004, SREG : 3400F103
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
DATA_START : 0x4378F090
Cause 00000024 (Code 0x9): Breakpoint exception
Writing crashinfo to bootflash:crashinfo_20000102-174011
=== Flushing messages (17:40:11 UTC Sun Jan 2 2000) ===
Buffered messages:
00:01:33: % Error opening nvram:/ifIndex-table No such file or directory
00:01:35: curr is 0x0
00:01:35: RP: Currently running ROMMON from S (Gold) region
00:01:45: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Versio
n 12.2(33)SXH2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 25-Apr-08 08:07 by prod_rel_team
00:00:09: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure con
sole debugging output.
00:01:32: SP: SP: Currently running ROMMON from S (Gold) region
00:01:45: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M), Versio
n 12.2(33)SXH2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 25-Apr-08 08:20 by prod_rel_team
00:01:45: %DOSFS-SP-5-DIBERR: disk0 is formatted from a different router or PC.
A format in this router is required before an image can be booted from this devi
ce
00:01:45: %SYS-SP-6-BOOTTIME: Time taken to reboot after reload = 62041 seconds
00:01:46: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:46: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:01:46: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:46: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
00:01:46: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system i
s operating on both power supplies.
00:01:49: %C6KENV-SP-4-FANHPMODE: Fan-tray 1 is operating in high power mode
00:01:54: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in
slot 6.
00:01:54: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 6
became active.
Queued messages:
00:02:00: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging out
put.
00:01:58: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exce
ption , reset by [6/0]
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x456b9d34
PC = 0x425eb984, SP = 0x43b0de58, RA = 0x4114d5dc
Cause Reg = 0x00003820, Status Reg = 0x34008002
rommon 1 > en
monitor: command "en" not found
rommon 2 >
rommon 2 >
