03-17-2011 07:49 PM - edited 03-04-2019 11:47 AM
Hi,
I will be upgrading some 2650XM routers to Cisco 2911 ISR's.
Please, I just wanted to verify If I could re-use the existing VWIC-2MFT-G703= in a Cisco 2911 ISR router.
VWIC2-2MFT-G703= is the replacement part number which is quite expensive about 4,000.00$/unit.
Thanks!
Gil
Solved! Go to Solution.
03-18-2011 03:05 PM
Have a look on
http://www.cisco.com/en/US/products/ps10537/products_relevant_interfaces_and_modules.html
and Cisco Supported and Unsupported Modules for Integrated Services Routers document
http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf
Table 5 (Unsupported Modules on ISR G2 - Cisco 1900, 2900 and 3900 Series routers) states that first version of VWIC is unsupported on 2900/3900
I was trying to install VWIC-1MFT-E1 to 2921 and it wasn't recognized by router, but 'show diag' correctly dispaly serial number and other info about module.
/lexxa
03-18-2011 03:05 PM
Have a look on
http://www.cisco.com/en/US/products/ps10537/products_relevant_interfaces_and_modules.html
and Cisco Supported and Unsupported Modules for Integrated Services Routers document
http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf
Table 5 (Unsupported Modules on ISR G2 - Cisco 1900, 2900 and 3900 Series routers) states that first version of VWIC is unsupported on 2900/3900
I was trying to install VWIC-1MFT-E1 to 2921 and it wasn't recognized by router, but 'show diag' correctly dispaly serial number and other info about module.
/lexxa
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide