12-08-2019 01:37 AM
I have two WAN lines, one internet line 30 Mbps and the other is WAN line connected to the branch with 20 Mbps:
My question is which is better to support this bandwidth and better throughput: CISCO router 888/k9, or, CISCO router 2911/k9
Solved! Go to Solution.
12-08-2019 02:10 AM
Hello,
if you have a choice, definitely go for the 2911. With a total of 50MB throughput, you are very likely to hit the maximum on the 888. The 2911 is listed as having a thorughput of approximately 180MB...
12-08-2019 02:18 AM
is cisco router 888 can't support the 50 Mbps
12-08-2019 08:35 AM
12-08-2019 02:10 AM
Hello,
if you have a choice, definitely go for the 2911. With a total of 50MB throughput, you are very likely to hit the maximum on the 888. The 2911 is listed as having a thorughput of approximately 180MB...
12-08-2019 02:18 AM
is cisco router 888 can't support the 50 Mbps
12-08-2019 02:50 AM
Hello,
I think it is listed as somewhere around 30, so it probably would support 50, but you are reaching the limits then. As stated, if you have a choice, go for the 2911.
12-08-2019 03:55 AM
Appreciated
12-08-2019 08:35 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide