06-08-2005 10:05 AM - edited 03-03-2019 09:46 AM
Our core router is showing more than 90% of CPU utilization and the SNMP Engine is taking more than 70% of the CPU cycle; I have gotten a Sniffer trace but from the core subnet, not really a lot from our NMS.
How can I find out the source for driving this high CPU utilization on SNMP Engine?
Solved! Go to Solution.
06-08-2005 12:02 PM
Hello,
you might want to check this document, see if that applies to your situation:
IP Simple Network Management Protocol (SNMP) Causes High CPU Utilization
http://www.cisco.com/warp/public/477/SNMP/ipsnmphighcpu.shtml
Regards,
GP
06-08-2005 12:02 PM
Hello,
you might want to check this document, see if that applies to your situation:
IP Simple Network Management Protocol (SNMP) Causes High CPU Utilization
http://www.cisco.com/warp/public/477/SNMP/ipsnmphighcpu.shtml
Regards,
GP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide