07-09-2007 12:20 AM - edited 03-03-2019 05:46 PM
Any body can help me which router is best fit to my network topology which has three fastethernet accroding to my network topology and which is going to place under core layer of my campus network which has not much traffics.In addition to this it has to have a NAT faction to have an internet connection with the external; system. In Addition to that the one that cost me low!!!!!!!!!
07-09-2007 12:56 AM
Hi,
do yo need wire-speed routing on the three fast-ethernet ? If so, the best would be a L3 switch like a 3560 or 3750 for this. Then for internet access you can use pretty much anything from the 871 and up.
07-09-2007 12:57 AM
Hi,
After understading by your explanation that you need a very basic router with NAT support, 871 router should be fit in for your requirement.
Please see the datasheet below:
http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a976.html
Please check the feature navigator link below for any specific feature support on the router:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTH,Please rate if it does.
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide