Is there a way to re-install a certificate of a virtual sd-wan edge router without decomissioning the device in vManage?
After some error the device certificate disappeared but on vManage it says certificate is installed. I could do a "request ... vedge_cloud activate" to have connection with vManage and vBond but still no control connection to the vSmart and cert is still not installed. I could re-install the root-ca-chain but that made no difference. The generated CSR (signing request) is visible in vManage but cannot generate a new one. On some routers the activate command + reload helped but not this one (same version..). This process is automated by default, when a new device is added vManage generates a CSR and signs it and installs it on the Edge but it seems this cannot be triggered but only with decomissioning and re-adding the device?
C8000V#request platform software sdwan vedge_cloud activate chassis-number ... token ...
C8000V#sh sdwan control local-properties
Found this command on vmanage cli but not sure if this is what I'm looking for and if this would install the cert on the edge too:
vmanage# request vmanage-sign ?
csr Sign the CSR and generate certificate
vmanage# request vmanage-sign csr ?
path Path to the CSR
serial Serial number of the certificate, in hexadecimal
| Output modifiers
vmanage# request vmanage-sign csr file
Value for 'file' (<string>):