cli iperf test on ios-xe

[dijix1990]

Hi, on the Vmanage I can start a speed test beetwen ios-xe devices, how can I do it through cli like as on a vedge device (tool iperf)?

[bigevilbeard]

@dijix1990 https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/operational-cmd.html#r_tools_iperf_11297.xml

[dijix1990]

but it's for vEdge not cEdge (ios-xe)

[bigevilbeard · Accepted solution]

I read in another thread it is not supported on cEdges, it is only natively supported on vEdges as they run IPerf in the vshell.

[dijix1990]

I thought that it was possible because it works through vManage web interface