02-29-2024 10:09 AM
Hello,
For testing purpose, i have created a overlay tunnel between site-5 to site-6. Though, i am getting a service vpn 10 route via OMP but unable to ping those prefix from site-6 Vedge devcie. Can i get a solution or suggestion if i missed something.
Attaching CLI output of site-6 for reference.
02-29-2024 10:27 AM
there is not attachment
MHM
02-29-2024 09:45 PM
@MHM Cisco World , attached as in below response.
02-29-2024 10:41 AM
Hello,
Are you pinging them within VPN 10? By default the ping is sourced from VPN 0.
Also as @MHM Cisco World mentioned there is no attachment.
-David
02-29-2024 09:44 PM
Hello David,
Yes, pinging with own vpn segment i.e. VPN 10. Apologized, previously attachment gone missed. FYI, as enclosed.
02-29-2024 10:55 PM
share this
show bfd session | tab
show tunnel stat
show omp routes 172.168.16.0/24 detail
MHM
02-29-2024 10:45 PM
Hi,
share show run vpn 1 and show ip route vpn 1 from both devices. Maybe you have return route problem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide