SDWAN - VManage Template

[uni1389]

Hello Guys, 

Am trying to implement Feature Template but getting following error, i have same feature templates for both vpn0 and vpn512 with interface id difference. 

#######################################################################

19-Jan-2024 23:03:55 CET] Configuring device with feature template: vEdgeDevTemplate
[19-Jan-2024 23:03:59 CET] Checking and creating device in vManage
[19-Jan-2024 23:04:00 CET] Generating configuration from template
[19-Jan-2024 23:04:03 CET] Device is online
[19-Jan-2024 23:04:03 CET] Updating device configuration in vManage
[19-Jan-2024 23:04:04 CET] Sending configuration to device
[19-Jan-2024 23:04:07 CET] Device failed to process request.  Error Message - /vpn/vpn-instance: Cannot delete eth0 interface from management vpn (512)
 Error Path - 
    /rpc/edit-config/config/viptela-vpn:vpn/viptela-vpn:vpn-instance
  
An element value is not correct : vpn-instance
#######################################################################

[Kanan Huseynli]

Hi,

most probably in VPN512 interface template you have interface which is not eth0. Correct it and it will work.

Basically, eth0 should be in VPN512 in vedge-cloud and you can't delete it.

If it doesnt work, show me VPN512 interface template screenshot

[uni1389]

HI Kanan, 

vEdge# show running-config vpn 512
vpn 512
interface eth0
ip dhcp-client
ipv6 dhcp-client
shutdown
!

[Kanan Huseynli]

It is your existing config, no? What do you want to push from vmanage- show it ,please

[dijix1990]

Hi, did you try to change eth0 in feature for vpn512? If it's true you shouldn't change eth0 for vedge, it's default interface