This video walks through the updated Site-to-Site IPsec VPN Wizard available within ASDM. The workflow has now been simplified and reduces the need for protocol specific knowledge.
Under windows 10 the video won't play on any browser. With all of the problems mentioned in this thread it would probably be a good idea to fix the video so that people don't spend hours finding one machine/browser that will work. I mean, you tube videos play fine on all of my browsers on all of my machines?
Any update on this, sure would be nice to watch the video that the ASA links to. If you're not going to provide the video anymore you should probably take the link out of the ASA software.
You declare yourself as a market leader, at least a link to a working video should be possible, when Cisco already removes wizards... Publish the video in yt, and we all can see it - as we don't have to use some extra complicated situations with the right OS, a very special videoplayer,... Why must Cisco do easy things so complicated that they even theirselves can't manage it?
The thing with clearing SA's can be "worked-around" with an event trigger and a "cle xla" - in most cases. We found out that the ASA saves info for phase1 which should be deleted, but isn't. Therefore reconnects tend to fail.
A cle xla deletes these info and you can reconnect your site2site.
At least this was a help for a lot of situations. The next thing can be the modem/router. We found out that if it's NOT a Cisco router, reconnects often fail until the router is rebooted. With 800 series router we had much fewer downtimes.
I have number of servers with Redis Pipeline (redis.io/topics/pipelining) enabled. A FTD is managing routing access between servers like this:Redis client --->FTD--->Redis Servers192.168.2.10/24-->192.168.70.33/24192.168.2.10/24-->192.168...
view more
Hello, I upgraded CSM 4.19 to 4.22 SP1 to be covered from the CVE-2020-27131 vulnerability.The thing is that the scan finds again this vulnerability. The customer informed me that this path cwhp/CSMSDesktop/about.jsptrigger...
view more
Hello all
I have a weird issue here, where I'm not sure if the fault lies with the Intel Wireless driver or AnyConnect or Windows 10 or something else.
Client has a public IPv6 address and a private IPv4 address on the Wi-Fi adapter. CPE has a public IPv4...
view more
Hello,I'd like to configure the ospf bi-directional forwarding on a FTD 2130 using FDM.Could someone help me? I've checked on FDM, there weren't any BFD CLI commands in OSPF config even I clicked on "SHOW DISABLED". But I saw in BGP config.Maybe I ca...
view more
Hello all, What parameters on a Cisco firewall FPR2140 connected in 10g (and I would say a firewall in general) could explain why a TCP flow is limited to between 370 and 430Mb/s while different test with iPerf showed the following :- 1 TCP flow : ma...
view more
