Hi All,
We are using 1380 VIC, it has Dual 40G Ports (That is 8x 10G DCE Ports and Each Port has 4 DCE Ports).
Is this right statement for 1380 Model VIC?
- We have created 2 vHBA’s and 6 vNICS.
- We are using Enable failover and Linux adapter.
- We are using IOM 2208XP with four uplinks for Both the sides of IOM-A and B.
Now coming to actual questions:
- OS is Detecting has six 10G ports (eth0-eth5), We are configuring each port as different vlan and purpose
Example: eth0 is for ISCSI with vlan 100, eth1 is for NFS with vlan 200 and eth2 is for secure data with vlan 300. We are not using another 3 ports.
Is our design is right for network configuration or we have to consider any other things?
- We are using Linux operating system example: RHEL.
- Is bonding is recommended so we can configure bonding on OS for interfaces and then create VLAN’s on top of bonding? so that all the network interfaces are using?