Hi folks,
I try to get interface traffic counter from FC-Interfaces via snmpwalk from my nexus 5596UP, NX-OS 7.0(1)N1(1). Without success.
Everything works for Ethernet interfaces:
snmpwalk -v2c -c ****** n5-1-060-4 IFmib
.....
IF-MIB::ifName.436207616 = STRING: Ethernet1/1
IF-MIB::ifName.436211712 = STRING: Ethernet1/2
IF-MIB::ifName.436215808 = STRING: Ethernet1/3
IF-MIB::ifName.436219904 = STRING: Ethernet1/4
.....
but I don't see any FC-Interfaces (Yes, I have configured some FC-ints on 5596).
On the other hand I have success with snmpwalk from my "old" Nexus5020
version 5.2(1)N1(6):
snmpwalk -v2c -c ****** n5-1-060-1 IFmib
...
IF-MIB::ifName.17301504 = STRING: fc2/1
IF-MIB::ifName.17305600 = STRING: fc2/2
IF-MIB::ifName.17309696 = STRING: fc2/3
IF-MIB::ifName.17313792 = STRING: fc2/4
....
IF-MIB::ifName.436207616 = STRING: Ethernet1/1
IF-MIB::ifName.436211712 = STRING: Ethernet1/2
IF-MIB::ifName.436215808 = STRING: Ethernet1/3
IF-MIB::ifName.436219904 = STRING: Ethernet1/4
Would appreciate if I could receive any hint ...
regards Thomas