Change MTU for Nexus 6000 series

[ngray2020]

I have a customer that would like to change the MTU size to the maximum on their Nexus 6004 switch.  I've done it on 5K's and 7K's, but if I'm reading correctly, on a 6K it has to be done via service policy.  Can someone comfirm this?

[Manish Gogna · Accepted solution]

Hi,

The procedure to do it on a Nexus 6K is given here

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/qos/6x/b_6k_QoS_Config_6x/b_6k_QoS_Config_6x_chapter_0101.html#con_1150612

Manish

- Do rate helpful posts -

[ngray2020]

Thank you Manish, I had read that guide previously and was wondering if there was another way.  I ended up following the guide to do it via service policy.

Thanks again