The following prompt appears when the ACCESS-Group is deployed in the SVI interface ERROR: policy rule not supported the configuration of the interface svi as follow: N6001-01(config)#int vlan36 N6001-01(config-if)# ip access-group log_any in ERROR: policy rule not supported N6001-01(config-if)# sh run int vlan36 !Command: show running-config interface Vlan36 !Time: Tue Nov 24 09:56:00 2020 version 6.0(2)N2(3) interface Vlan36 no shutdown no ip redirects ip address 172.255.36.252/24 hsrp 36 preempt priority 105 ip 172.255.36.254
