08-26-2012 11:05 AM
Is it possible to configure vem on a host by host basis without vsm?
08-26-2012 11:26 AM
Hi Sai,
No you cannot configure the VEM on each host without the VSM. As one of the basic concepts of the N1K as a DVS the VSM controls and programs all the VEMs.
./Abhinav
08-26-2012 11:53 AM
Thanks Abhinav..
08-28-2012 04:10 AM
Hello,
Just in case i dont have a VSM,
Can i configure only the VEM on a single blade as a standard Stand alone switch not DVS?
Repeating the question,
It is clear that VEM for DVS is configured by the VSM.
I have only 1 blade and dont have a VSM.
Can i make the VEM on that blade act as a standalone switch ?
Thank you
08-28-2012 08:58 PM
In that case you can use vswitch from vmware but you loose nx-os cli features since it requires vsm
Sent from Cisco Technical Support iPhone App
08-28-2012 10:01 PM
Thank you so much for the Explanation !!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide