FEX Chassis Numbering

[SATORU SAEGUSA]

Hi, Can I use same chassis ID number to two Nexus with vPC single-homed topology? !!! N5k-1 and N5k-2 configuration feature fex feature lacp feature vpc slot 101 provision model N2K-C2232P exit ! fex 101 pinning max-links 1 type N2232P exit ! interface E1/1 - 2 no cdp enable channel-group 101 no shutdown exit ! interface po101 switchport mode fex-fabric fex associate 101 exit Thank you for your cooperation in advance.

[Reza Sharifi · Accepted solution]

Hi,

Should not be an issue.  The FEX IDs are locally significant.

HTH

[SATORU SAEGUSA]

Hello, Reza-san.

Thank you for your answer.

Please let me know the document URL on Cisco.com website if you know any.

Arigato!

[InayathUlla Sharieff · Accepted solution]

Arigato,

As Reza said you can go ahead with the same.

Please find below document URL:

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/confi
guration_guide_c07-543563.html
(refer to figure 4)

HTH

Regards

Inayath

[SATORU SAEGUSA]

Hi, Inayath-san.

Thank you for your clear answer!

Kind regards,

Satoru