Has anyone experienced issue with VLAN tagging and Hyper-V 2012. Our server Team wants 1 management Vlan and one Migration VLAN. Also, it is teamed nics on one Port channel so I create the portchannel to be a trunk and trunk the 2 vlans. I can see one vlan associated to the Vnic but it is not routing even though it has a Ip addressed assign on correct VLAN. One Ip is pinging on the other vlan. This happens without no VLAN Native. I have toyed with native VLANs. However, same thing occurs.
switchport mode trunk
switchport trunk native vlan 2
switchport trunk allowed vlan 2,207
spanning-tree port type edge trunk
207 is a vlan for migration and is a OTV vlan between 2 data centers.
Cisco Champion Radio · S7|E30 Taming Your AI/ ML Workloads with Kubeflow
As organizations increasingly introduce machine learning (ML) capabilities to their existing products, their artificial intelligence (AI) projects and operations complexity grows. A...
Cisco Data Center Networking Demo Series – Assurance and Insights
Live webinar: Cisco Data Center Networking Demo Series – Assurance and InsightsThursday, August 27, 202010:00 AM Pacific Standard Time (San Francisco, GTM -08:00)
With Cisco Data Cen...
The Future of Fast: Introducing Nexus 3550 Series and Nexus SmartNICs
Network Insider Live Webinar
Tuesday, August 25, 202010:00 am Pacific Time(San Francisco, GMT-08:00)
The Nexus 3550 Series and Nexus SmartNIC technology, formerly Exablaze...
Original Blog published @ https://blogs.cisco.com/datacenter/spinning-up-an-nvme-over-fibre-channel-strategy
Every so often there comes a time when we witness a major shift in the networking industry that fundamentally changes the landscap...