As part of a deployment of two site, four-node cluster, I've configured a replication network on both sides within Hyperflex Connect. All underlying L2 and 3 networks are configured beneath and there are no firewall policies stopping this traffic.
The L3 layout of the networks are as follows:
- Production Side - 10.1.80.192/26
- DR Side - 10.8.80.192/26
I've typo'd the PRODUCTION sides L3 network configuration; where it should be 10.1.80.192/26, I've put in the DR side; 10.8.80.192/26.
What would be the best way to get this amended to be correct? Does this need to be ran through TAC as I can see the interface that has been created and addressed on the STCTL VMs but can't edit them.